Titanium Tubing Technology has diversified its portfolio to serve our clients and wider range of industries. We recently partnered up with MERUS GmbH and promote an Environmentally friendly water treatment technology (MERUS Ring) that has been around for 23 years.
Since 1996 MERUS have been providing solutions for common challenges in the water industry. This technology has been used in private homes, small building and large industrial facilities. We advise and support the solution to rid piping and machinery of limescale, corrosion or biofouling. No matter how small or big your problem is.
By installing the MERUS Ring around the pipe, the solubility of the soluble parts in the water will increase. This means for example: more limescale is soluble in the water and runs off with the water instead of blocking pipes and valves.
The trick here? We use the natural oscillation which is characteristic for every chemical substance. This can be changed to our benefit with superimposing waves.
This method of water treatment doesn’t need any additional energy source and the consumption of the chemical additives in the water can be reduced while there will be no side effects. This is ideal for drinking water as well as industrial water.
How MERUS works
The special thing about MERUS Ring is that no chemistry is needed to treat the water. This is ideal for drinking water as well as industrial water. No undesired side effects or environmental damage is to be concerned about.
MERUS Ring does change the physical behavior of dissolved ingredients of the water. This may sound a bit complicated but is rather simple.
Water can carry a certain number of foreign particles. If this amount is exceeded, these particles settle and can form a hard crust. One popular example is limescale. It’s very important to know how the atoms of water and limescale move or oscillate. If somehow, this movement is changed, the solubility of limescale in water will increase.
The atoms move synchronously, this means that every single atom oscillates just like its neighbor. If a new oscillation is brought into the movement, these two can overlay. This is called interference. Thus, two different oscillations result in one new. The new oscillation that is brought into the fluid intentionally, is called active oscillation
How the oscillation is brought into the fluid?
Superimposing oscillations – basicsNatural Oscillation, Active Oscillation, Resulting Oscillation
The natural and active oscillation may have the same frequency but opposing amplitudes.
They are exactly superimposed and therefore cancel each other out. That is why the resulting oscillation lays on the x-axis.
The natural and active oscillation may have same frequency but different amplitudes. (tops and valleys are at the same time)
In such cases, they mutually reinforce each other. Thus, the resulting oscillation has a higher top than the original oscillations.
We have been doing water treatment for more than 20 years.
In the past we have made our experiences with nearly every issue concerning fluids in various industries and applications.
What we promise
We are able to visualize the effect of a MERUS Ring in your pipes, machines or water systems and make it measurable. There are different methods for a before and after comparison to show the performance of the water treatment. Often existing methods can be used.
We are convinced of the performance of our MERUS Ring. For two decades we have been installing our rings all over the world for different applications.
That’s the reason why we give a full warranty on the effect for years after the purchase. If you should have the impression that the effect diminishes over time please contact us to find a solution for this.
We have a heart for sustainability. This means: under normal conditions the MERUS Ring works far longer than five years. We guarantee the performance of the MERUS Rings for five years.
Installing the MERUS Ring is very simple. No shut down or cutting of pipe in required. The details are thoroughly explained in our installation manual that comes with the delivery of the MERUS ring.
- Algae Cooling Tower
- Barnacles/Biofouling in the main Sea Water Inlet
- Bathroom & Shower
- Biofouling and Biofilm
- Biofouling at a refinery
- Boiler corrosion prevention
- Brown Tap Water
- Cooling Tower Water Treatment
- Cooling Water System in Refinery
- Corroded Moulds
- Corrosion and Limescale in the Cooling Loops
- Corrosion in the sprinkler system
- Corrosion Steam Boiler
- Domestic appliances – Kettle & Coffee Machine
- Eco Friendly Water Treatment for Hotels
- Energy Saving in a Steam Boiler
- Fire fighting system – cleaning the rust stop the corrosion.
- Fouling in Heat Exchangers stopped and removed
- Fresh Water Generator on vessels free of deposits
- Heating & Cooling
- Legionella in Nursing Homes
- Legionella in Water
- Lime Slurry used in Water Works
- Limescale and algae in the swimming pool
- Limescale and algae in the water fountain
- Limescale in effluent water pipe of a refinery
- Limescale in the Combination Steamer or Oven
- Limescale in the Dishwasher
- Limescale in the Hot Water Boiler
- Limescale in the urban water supply
- Limescale in the washing machine in hotel laundry
- Machine cooling
- Marine Diesel Engine – Cooling with Sea Water
- Protect Pumps against Fouling
- Reduced water pressure, due to deposits in pipes and machines
- Reducing Fouling in Reverse Osmosis Plant
- Sea water – evaporator on a ship
- Seawater Treatment Offshore
- Spa Area and Showers in Fitness Clubs
- Struvite-Urine Stone
- Tour Odeon Monaco
- Water Injection Well
- Water Softening